Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Engine - 2 stroke (http://www.gasgasrider.org/forum/forumdisplay.php?f=37)
-   -   ec 300 sudden power loss, wont rev (http://www.gasgasrider.org/forum/showthread.php?t=19237)

spooly 03-10-2015 06:33 PM

I also have two leaking fork caps only had a full suspension rebuild 2 races ago.. There's always something.!!

Fastboysparky 03-11-2015 01:45 AM

Same here. Had new fork seal before xmas and now they leaking again. Going to try the plastic bottle trick on them


Sent from my iPhone using Tapatalk

spooly 03-11-2015 05:02 AM

My caps are leaking because the rebound screws had split and my suspension guy took the screw out and cut the top off it a made a new head so I could adjust um .it was worth a try anyway I spouse but the two are leaking now and have to be replaced luckily iv found replacements for ok money. .

spooly 03-11-2015 05:04 AM

Quote:

Originally Posted by Fastboysparky (Post 149608)
Reeds price was 44 pound. Not as it has come out above.


Sent from my iPhone using Tapatalk

Who u using for parts??

Fastboysparky 03-11-2015 12:49 PM

Sadmx. Mine has vforce3 which has like a twin petal. Other models have vforce1 which are different.


Sent from my iPhone using Tapatalk

Fastboysparky 03-11-2015 01:00 PM

I have just done a compression test and was getting 160 psi for 10 kicks. It's not bad so will not be stripping top end.


Sent from my iPhone using Tapatalk

Fastboysparky 03-14-2015 05:08 PM

I fitted the new reeds today and took her for a blast, saddly no difference. I removed the air filter (just to try anything) and tried again, still no difference. I can only think that it's got to be electrical.


Sent from my i phone whilst doing a tail whip.

spooly 03-14-2015 05:32 PM

Quote:

Originally Posted by Fastboysparky (Post 149778)
I fitted the new reeds today and took her for a blast, saddly no difference. I removed the air filter (just to try anything) and tried again, still no difference. I can only think that it's got to be electrical.


Sent from my i phone whilst doing a tail whip.

Same scenario here mate.. word for word. . And I actually went through the electrical connections too today still no difference. . Im going to take the barrel off again and inspect and if that doesn't work it has to be electrical

Fastboysparky 03-14-2015 06:43 PM

Let me know if you have success. I may have found an ecu, the guy is sending me pics of it tomorrow and if it's the same as mine then I will have it.


Sent from my i phone whilst doing a tail whip.

spooly 03-14-2015 07:12 PM

Fingers crossed


All times are GMT -5. The time now is 09:35 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org