Bugger
 

Email reply from Steve:

"We don't make the linkage skid plate for the 2014 and the 2012/2013 is not the same. We have no plans to make any for Gas Gas in the near future"

I've emailed a few other companies (Stillwell Performance/Fastway) but I'm assuming their response will be the same.

I hope the aftermarket industry picks up for the Gasser a bit and someone makes a linkage skid plate, as the '14 linkage sticks down a fair way and I ride a lot of rocks.

linkage skid
 

[QUOTE=StuJohnson;133412]Shoot the owner an email. My experience is he is very helpful and customer service was great!!


I just e-mailed them. I figure if the 3/4" lower doesn't effect the suspension,and the seat height is a little lower that will help me .

Darn - that stinks.

Take a look at this one on Slavens Racing.

I don't know exactly what the new 2014 linkage looks like. But this one that is made for KTM's (sorry) sure seems to be a somewhat of an easy thing to make if you have the connections to a machine shop. -- Oh and after posting this I looks like this one is made by Steve...

http://slavensracing.com/shop/link-s...xf-by-slavens/

This one is interesting --- You would have to drill holes in the linkage arms

http://www.zbrozracing.com/kfx-linkage-skid-plate

Thanks for that link. The '14 linkage looks exactly like that. I doubt ill be so lucky that it is the same but ill do a bit of research and see

linkage skidplate
 

What about a simple linkage skidplate? These made by a local Wa rider.

https://www.facebook.com/pages/SXS-S...95663850463171

Here is the version for the 2012.

http://shopusa.emperorracing.com/p/l...300_2012?pp=24

2014 should be the same right?

No different. Changed on 2013's. This thread here talks more about it.


Sent from my iPhone using Tapatalk

offta, I missed that part. my bad.