Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Chassis & Body (http://www.gasgasrider.org/forum/forumdisplay.php?f=20)
-   -   2003 300 feels cramped! (http://www.gasgasrider.org/forum/showthread.php?t=23679)

Toshy 07-04-2018 08:50 AM

2003 300 feels cramped!
 
I have been messing with the setup on my 03 300 and it feels very small. Anybody else notice this? It makes standing on the bike very tireing. Ive fitted some taller bars and modified some YZ clamps to move the bars forward but its still feels short. Im thinking of upgrading to a newer bike does anybody know if the newer frames feel the same??

Anders 07-04-2018 11:42 AM

Quote:

Originally Posted by Toshy (Post 184095)
I have been messing with the setup on my 03 300 and it feels very small. Anybody else notice this? It makes standing on the bike very tireing. Ive fitted some taller bars and modified some YZ clamps to move the bars forward but its still feels short. Im thinking of upgrading to a newer bike does anybody know if the newer frames feel the same??

The frames from 2012 onwards feels bigger.

gasgasman 07-04-2018 06:04 PM

The pre '12 bikes were always referred to as the 7/8ths bike.
Due to the smaller chassis.

Toshy 07-05-2018 09:07 AM

Ok good to know. I think I?ll start shopping for a 2012+
Any year better than the others?? There seems to be a lot of 2013 for sale for good prices.

gasgasman 07-05-2018 09:16 AM

2012s were a flop. '14 on up were the best years.

Anders 07-05-2018 10:50 AM

Quote:

Originally Posted by Toshy (Post 184110)
Ok good to know. I think I?ll start shopping for a 2012+
Any year better than the others?? There seems to be a lot of 2013 for sale for good prices.

I'd stay away from the 12, but 13 should be ok. But as already mentioned, I would reccomend the 14 and up. There you will get the Reiger rear shock.

gasser 07-05-2018 07:00 PM

Quote:

Originally Posted by gasgasman (Post 184103)
The pre '12 bikes were always referred to as the 7/8ths bike.
Due to the smaller chassis.

That's correct I've measured my friend's Beta xtrainer side by side with my 2011 ec250 and they are almost identical in size.

Zman 07-06-2018 07:39 AM

I am 6'4" and I ride a 2000 and I had the same problem I found the Fastway pegs in the lower position helped. I have my bars up one inch and forward one inch from the stock position. Straighter bars with little curve back helps too.


All times are GMT -5. The time now is 04:47 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org