Greetings from Central WA (Wenatchee)
 

I just bought a new to me bike; a '03 EC400FSE. This is the bike that belonged to Jib4Pow, and I'm hoping to put a lot of miles on her this summer/fall. I'm recovering from a work injury (still) from last August. My foot is the only reason I'm not putting time on the bike so far. I've peeled most of her apart looking for broken/worn parts, and the only thing I really need to do is replace the tires with DOT-approved shoes, and replace the chain guide with a TM Designs unit, as the old stock one was munched pretty bad. I've bought a set of Dunlop 606's from Motosport, and I've bought the TM Designs chain guide straight from them. This engine was rebuilt by a very competent (from what I gathered from all I've asked about him) engine builder and rider, and only has 1000 miles on it. Looking forward to contributing what I can to the forum, and sharing my experiences with this bike and the places she'll take me :D

Kevin

Forgot to mention...
 

I also bought a front and rear set of Neutec's Tubliss inserts to go with my Dunlops. I'll report on those after I get everything installed and get some time on the system.

Kevin

Welcome to the forum. There are few active riders in the State. Watch for some get togthers. There was one recently. The next may be in the Fall or next Spring.

I see the same one every time I look in the mirror:confused: Haven't rode with REVERUP, for about a month. My friend Chris will be active on his '12 EC300...I'll see to that.:D

Welcome aboard!

Did someone say single track?
:D

You have a single tracked mind.:D