2019 EC 300 Air filter Fitting
5 Attachment(s)
Changing out the air fiter for the first time
Got a new funnel web and oiled it up. Fitted it up and at first it sealed ok at the left side but not on the upper side. A bit of wiggling and it seemed to fit better on the top with the black seal surface surface making good contact with the air box. When I fiited the spring loaded rod it fitted into the platic cup at the back of the airbox but it seems to be at a strange angle. Hopefully you can see this from the photos. Have i messed up? Is there some tips/ tricks to replacing the filter? Or does it look ok? [ATTACH][ATTACH][ATTACH][ATTACH]Attachment 8932[/ATTACH][/ATTACH][/ATTACH][/ATTACH] |
2 Attachment(s)
|
Both my twin air and uni filters do seem to flare up a touch on the flange side like yours. I've found that you need to press down in different locations around the outside edge of the filter towards the engine 3 or 4 times until you feel it isn't seating any further.
I've never had any dust make it through doing it this way, not sure about the spring clip though. |
Thnbaks for the feedback....yeah I found I had to keep pushing around the edges to get it to seat
|
All times are GMT -5. The time now is 07:35 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org