2013 gg 125
 

Found this on the GasGas Finland FaceBook page.

https://sphotos-b.xx.fbcdn.net/hphot...97412297_n.jpg

I want one

I like it. Wonder if they did anything to the motor? A factory 144/150 would be real cool.

Looks like a fun bike to ride......now, stuff a 200 motor in that smaller frame.

on the picture you can see a new cylinder and as far as I know they will bring a electronic PV

The frame is the same as the 300, just different mounts.

Thats a shame, seems like it would be too big and heavy for a 125. With the old frame you could get away with this because it was smaller, but now?:confused:

I compared my 2011 EC125 frame with a EC300 and the difference is only the stearing angle and the lower pipes below the motor. The mainframe ist NOT smaller than the EC300 one. The biggest difference between the 125 and the 300 is the weight of the engine. The 125 motor is about 15lbs to 20lbs less. This makes the big difference in the handling.

Yes I know that, but the point is the older frame starts out smaller for the 250/300, so it seems more correct for the 125. I like the new frame but lets face it it was designed as a 250/300 and will be heavy 125.

about the new frame compared with the older one, you are right, but I checked the weight and the difference is only the motor!