Shorty clutch lever for a '19 ec300
 

I did a search and read some older posts but didn't find anything definitive, what'll cross over to suit a '19 that's short?

And no, I'm not cutting my current lever :D

Midwest do one I think. I was looking at them but decided to try my lever further over on the bars first to see if that fitted my style better

Link brother? :D

Don't waste your time with the Midwest lever.
The engagement point is all wrong.

Here's a two finger lever. Only the lever comes with this.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Thanks for the link gasgasman :)

Do you have a part number for the lever as Amazon US won't sell to us lowly folk in Australia :(

Buy a spare lever and chop it off. That's what I did with mine. I milled a flat on the back side and fitted a bent piece of stainless by shaping the piece and screwing it to the rear side. You just need to make the cut so it is positioned for your own "two finger" width.

You're welcome.
https://www.ebay.com/p/Magura-072312...utch/171257379

Thanks brother :)

I bought the lever from that very listing, not sure how far $1.99 shipping is gonna get me though :D

We'll see :)

+1 for that lever. I love mine.

Lever turned up, took a week to get here......Not bad for a $1.99 shipping :cool:

I liked their shipping prices so much I bought a pair of Renthals for one of my Bandits,If the bars are a nice fit I might buy another pair of the same for the other Bandit. :D

Thanks again gasgasman :cool: