Rieju & GasGas Legacy Riders Club Forum - Top end rebuild...Piston question

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)

- Enduro Engine - 2 stroke (http://www.gasgasrider.org/forum/forumdisplay.php?f=37)

- - Top end rebuild...Piston question (http://www.gasgasrider.org/forum/showthread.php?t=19749)

95jersey

06-04-2015 08:11 AM

Top end rebuild...Piston question

This is probably a dumb question, but I am rebuilding the top end of my EC300 and I forgot to look at which way the piston gets installed before I took the stock one out.

I have a Wossner piston and it has an arrow on the top. Do I point this arrow toward the front wheel or the carburetor?

Jacob 'Berg

06-04-2015 08:21 AM

Quote:

Originally Posted by 95jersey (Post 153521)

Arrow points towards the exhaust port (front tire).

95jersey

06-04-2015 08:52 AM

thanks much!

Capz85

06-04-2015 01:01 PM

Also wossner piston rings have a "w" on them these face up,just incase you didn't know

95jersey

06-04-2015 03:48 PM

she is installed and running!

Blakelpd5

06-04-2015 04:51 PM

Quote:

Originally Posted by Capz85 (Post 153540)

Also wossner piston rings have a "w" on them these face up,just incase you didn't know

"n".....

Capz85

06-05-2015 12:23 AM

:p damn, almost

All times are GMT -5. The time now is 02:49 PM.