2008 Raga 250 Rear Brake Height Adjustment
 

What does Gas Gas use as a rear brake height adjustment? There is no 6mm adj screw? The only thing on the frame is a welded-on tang that the lever hits, but it is quite far away making the rear lever higher than I want. I don't see anything in the parts catalog?

Thanks!

Strange. On my 14 TXT250 the lever itself has a cap head screw in it that bears against the swingarm pivot circle of the frame.

Check lever for threaded fitting. Could add something there if not.

I did, nothing there.. Even pictures of spares don't show an adjustment bolt. I'll make something. Thanks!

Call Jim Snell he will tell you

http://www.trialspartsusa.com/index.html

Confession time. Mine has an aftermarket lever. I did especially go downstairs to look.

. . . But didn't check the spares box that would have the original.

Quick Google comes up with this.

https://www.enduropuro.it/shop/en/fr...s-txt-pro.html

I think mine is another brand so look around.


That being said, I also found this.
https://www.bike-parts-gasgas.com/ga...rts/BE25922018