Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Engine - 2 stroke (http://www.gasgasrider.org/forum/forumdisplay.php?f=37)
-   -   hole in engine????? (http://www.gasgasrider.org/forum/showthread.php?t=10829)

lonetree 10-19-2011 08:18 PM

hole in engine?????
 
just dropped the gear oil on the ec250, a 09.....
inbetween the gear drain bolt and the crank drain bolt, i have found a drilled hole that appears to be tapped, approx 6mm but maybe a fine thread or somthing as a standard m6 wont quite go in....
WHAT is this hole? where does it go? should it have a bolt in it?
bike is running great, no oil leaking or anything, just dont want dirt and water getting into my engine.

gasgasman 10-19-2011 08:35 PM

http://www.gasgasrider.org/forum/showthread.php?t=10805

lonetree 10-19-2011 08:43 PM

wheeew, thats ok then....
was worried for a second....


All times are GMT -5. The time now is 01:56 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org