Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Engine 4 stroke (including EFI & Exhaust) (http://www.gasgasrider.org/forum/forumdisplay.php?f=45)
-   -   2009 450FSR valve specs (http://www.gasgasrider.org/forum/showthread.php?t=20776)

schlitzy 01-11-2016 05:58 PM

2009 450FSR valve specs
 
I'm looking for the specs for checking the valves....

I found
Intake 0.13 - 0.17
Exhaust 0.18 - 0.22
for 2005 here...http://www.gasgasrider.org/forum/sho...ht=valve+specs

And I found intake tolerance is 0.10-0.15 and exhaust 0.20-0.25 for a 2010 here...http://www.gasgasrider.org/forum/showthread.php?t=20692

Are either of these correct for my 2009? Did the values routinely change from year to year for the same displacement?

TIA
Schlitzy

BSM2 01-12-2016 03:00 PM

No, they should be the same

schlitzy 04-07-2016 08:46 PM

done deal
 
OK, I could never get an exact answer so I emailed GG from their website and...they quickly responded so here you go, valve specs for 2009 450fsr

Dear Mr xxxxxx,

First of all, we would like to thank you the interest in our brand.

Regarding to your request, please find below the information needed:

Intake: 0.15mm
Exhaust: 0.20 mm

For any other technical information, we recommend you to contact our importer in your country.
You will find the list of importers in our website http://www.gasgasmotos.es/en/dealers.html

Best regards,

logo
_

Atenci?n Cliente
_

Calle Unicef, N? 17 (Pol. Industrial Torremirona)
17190 Salt (Girona) Spain
Tel. +34 972 40 61 15 Fax. +34 902 47 61 60
E-mail: officegg@gasgasmotos.es
Web: www.gasgasmotos.es


All times are GMT -5. The time now is 07:24 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org