GasGas Riders Club Forum

GasGas Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Engine - 2 stroke (http://www.gasgasrider.org/forum/forumdisplay.php?f=37)
-   -   clutch basket mod (http://www.gasgasrider.org/forum/showthread.php?t=6464)

stainlesscycle 12-11-2009 07:39 AM

clutch basket mod
 
i tore my basket apart and found 2 rivets missing... so i removed all the rivets, and am hoping to tap the basket and run the bolts in from the backside. or do i tap the thin plate and run flat sockets/ovals in from the inside of the basket (seems awfully thin, don't know if bolts will let go...)? is there clearance issues with the button heads hitting kicker intermediate gear underload? (there's aprrox. 3mm clearance between button heads and intermediate gear static, not sure if there's any 'wobble/deflection under load...'

anyone done this???

stainlesscycle 12-11-2009 09:15 AM

welp, i tapped the basket and ran some m5 buttons in it. we'll see how it works.

stainlesscycle 12-11-2009 10:00 AM

works fine for my zip around the yard. ohh and you know that sound that you think is your pv? and it only happens when you lug the motor? well in my case it was the basket rattling around from loose rivets on the clutch cush drive.. noise gone. nice.

mxdj2003 12-14-2009 06:08 PM

im glad you got it together,i did this mod to my clutch a year ago and havent had any issues

jriley43 02-09-2010 08:36 AM

clutch basket mod
 
Quote:

Originally Posted by stainlesscycle (Post 37420)
welp, i tapped the basket and ran some m5 buttons in it. we'll see how it works.

what length was your m5s

stainlesscycle 02-09-2010 10:12 AM

i can't rememember the length now, sorry. 5x14 or so i'm guessing.


All times are GMT -5. The time now is 03:21 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org