Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)

- Enduro Electrical & Wiring (http://www.gasgasrider.org/forum/forumdisplay.php?f=19)

- - Kill Switch (http://www.gasgasrider.org/forum/showthread.php?t=3713)

Dingo

12-05-2008 01:05 AM

Kill Switch

Hey Hey

I have an 07 EC300. Ive taken off the light and the speedo. I would like to remove the switch gear for the horn, indicators, lights etc, and just have an aftermarket kill switch.

Can anyone tell me what to connect to what?

Dingo

12-05-2008 10:16 AM

:( Anyone?

gasgasman

12-10-2008 07:53 AM

Take your switch bezel apart and trace the wires to the kill button.
Cut those wires and splice in your new kill switch. Any Jap bike kill switch will work.

2 strokes 4 life

12-10-2008 09:34 AM

I used a YZ250 kill switch without any problems. I just connected the wires to the black and yellow coming from CDI and the soild black coming from the CDI and I was all good.

Dingo

12-10-2008 04:23 PM

Thanks guys.

Traced them, and sorted with a YZ Kill switch.

Alls good :)

All times are GMT -5. The time now is 06:33 AM.