Rieju & GasGas Legacy Riders Club Forum
Page 1 of 5 1 23 Last »
Show 40 post(s) from this thread on one page

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Engine - 2 stroke (http://www.gasgasrider.org/forum/forumdisplay.php?f=37)
-   -   Technical Bulletin - Crank and Flywheel Nut (http://www.gasgasrider.org/forum/showthread.php?t=24793)

Harty89 10-29-2019 06:38 PM
Technical Bulletin - Crank and Flywheel Nut
 
1 Attachment(s)
Info from GasGas Australia Regarding defective Crank pinion locking nuts and a note about the flywheel nut. See attached PDF

rodent 10-30-2019 12:29 AM
What's the consensus, take the steed back to the dealer or do it yourself?

Doc Brown 11-01-2019 01:22 PM
Quote:
Originally Posted by rodent (Post 192653)
What's the consensus, take the steed back to the dealer or do it yourself?
I received a call from my dealer and brought the bike in. Mine had the wrong nut and the dealer replaced it.

Jakobi 11-03-2019 03:13 PM
Quote:
Originally Posted by rodent (Post 192653)
What's the consensus, take the steed back to the dealer or do it yourself?
Depends what's easiest for you, and your relationship with the dealer.

I need to check my VIN. Does anyone know if the crank nut has changed over the years? Namely the thread pitch? I have a spare one from around 2013 that I ordered.

rodent 11-09-2019 12:00 AM
Quote:
Originally Posted by Jakobi (Post 192699)
Depends what's easiest for you, and your relationship with the dealer.

I need to check my VIN. Does anyone know if the crank nut has changed over the years? Namely the thread pitch? I have a spare one from around 2013 that I ordered.
Gonna book it in this week and drop off hopefully. The dealer and I have some history, I'm not sure how it's gonna play out. I'll reply with the outcome :D

I'll ask about the nut while I'm there.

Spanish Christini 11-11-2019 02:38 AM
Subscribed.

rodent 11-15-2019 06:22 PM
I dropped the bike off at the dealers yesterday, dealer told me that Gasgas have zero stock of the nut that may need to be replaced. I've since bought one elsewhere should mine need to be replaced.

Jakobi, dealer told me that the nut is the same for the 2013.

Jakobi 11-16-2019 12:27 AM
Quote:
Originally Posted by rodent (Post 192822)
Jakobi, dealer told me that the nut is the same for the 2013.
Why didn't we see any failures on other models if they have been using the same nuts I wonder??

rodent 11-17-2019 11:19 PM
Quote:
Originally Posted by Jakobi (Post 192823)
Why didn't we see any failures on other models if they have been using the same nuts I wonder??
Crossed wires, the dealer told me that the 2103 nut that you bought is the same as the one that needs to be installed on the current bikes.

It should have the groove cut into the corners.

Jakobi 11-18-2019 05:16 AM
Quote:
Originally Posted by rodent (Post 192824)
Crossed wires, the dealer told me that the 2103 nut that you bought is the same as the one that needs to be installed on the current bikes.

It should have the groove cut into the corners.
That makes more sense!

Where can I buy one of these 2103 models? :D :D :D


All times are GMT -5. The time now is 07:01 AM.
Page 1 of 5 1 23 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org