EC300 exhaust
Goodday!
The exhaust of my '02 Gasser EC300 is not in the best shape anymore, Do exhausts of newer EC300 fit? On pics they basically look quite alike/the same. |
I put two different 2007 pipes on a 2003 GG300 and 2004 GG300. As I recall I needed to shorten the pipe slightly so the muffler would go on all the way and I think I needed to either slightly bend the pipe mounts and or drill a new hole to align with the lower rubber mount. I think one may have also needed a minor dent to provide clearance for the radiator bottom tank. It was relatively easy and I would not hesitate to do it again.
|
Quote:
Thanks. Edit : What pipe is recommended for a bit more bottom end grunt? |
Quote:
|
I have a reasonably straight gnarly for an 07 I could sell you for cheap
|
All I had to do was fit a new lower mounting rubber. One has straight, one has offset.
|
Excellent news! Could you have drilled a hole in the lower pipe bracket to align with the original mount?
|
1 Attachment(s)
Smells like too much of a bodge to me ;)
Especially considering the cost of mounts... |
Those mounts look very similar to the original. Was the new one longer or was it offset between the input and output mount locations?
|
1 Attachment(s)
I believe it's pre 07 has straight mount as above. And post 07 has offset mount like such.
|
All times are GMT -5. The time now is 03:40 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org