Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)

- Enduro Engine 4 stroke (including EFI & Exhaust) (http://www.gasgasrider.org/forum/forumdisplay.php?f=45)

- - Retro fit carb (http://www.gasgasrider.org/forum/showthread.php?t=7987)

trxpeter

10-03-2010 02:27 AM

Retro fit carb

Is it possible to retro fit a carb from a 450 Pampera to a 04 FSE ? I've had enough of the friggin around the EFI has caused me and just want reliablity.:(

iancp5

10-03-2010 01:11 PM

Quote:

Originally Posted by trxpeter (Post 49574)

Is it possible to retro fit a carb from a 450 Pampera to a 04 FSE ? I've had enough of the friggin around the EFI has caused me and just want reliablity.:(

If the engines are in the same state of tune I don't see why not. You may have to do somthing creative with airboxes. Also check there is enough clearance - I assume it's am FCR and they are quite tall. If the engines are in a different state of tune you could have quite a bit of friggin around jetting it.

gasgasman

10-03-2010 05:38 PM

MotoWest was working on a conversion kit. Don't know if ever saw the light of day.

trxpeter

10-04-2010 02:23 AM

I'm getting close to giving up on sorting out this EFI problem and thought it could be a viable option, Pampera's sold here ok , so there could be parts around.

widebear

10-04-2010 12:23 PM

What your wanting to do is not rocket science. 39 mm fcr Mikuni and possibly an drz ecm and a manifold to carb boot, incidently all readily available on ebay.

All times are GMT -5. The time now is 09:11 PM.