2013 ec250 clutch master cylinder
Can anybody help me with what clutch master cylinder I may be able to swap/upgrade to on my bike. It currently has an ajp one fitted that is coming to the end of its life I feel so looking for some ideas on what to replace it with.
Thanks |
Why end of life?
Is it leaking or dented or rusting internally? You may be able to put a master cylinder seal kit through it and it'll be fine again with some new fluid. Something like this: https://ttmoto.com.au/shop/ajp-clutc...ral-oil-9-5mm/ (Check for the right one, I just did a quick google and came up with the above result) |
Quote:
Bike shop fitted a new seal kit and it?s leaking after one ride Obviously I took it back to be redone and he has said that the bore looks worn and that?s why it?s leaking so will probably leak again after this new seal |
Quote:
|
Quote:
|
Like brake masters, they are only bored into bare ally. They will eventually wear the bore. Some casting may be softer or slightly porous.
|
The AJP master cylinders from that era have been of very low quality.
A Magura replacement will be a much better option. |
Thanks all. I will have a look for a Magura that would fit then in case it starts to leak again.
|
All times are GMT -5. The time now is 11:11 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org