Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Electrical & Wiring (http://www.gasgasrider.org/forum/forumdisplay.php?f=19)
-   -   Enduro Versus Trials Speedo Cluster..... (http://www.gasgasrider.org/forum/showthread.php?t=16360)

sevenfourate 12-17-2013 12:36 PM

Enduro Versus Trials Speedo Cluster.....
 
When i bought my 2006 EC 250 a few months ago i knew the speedo cluster, rev-counter etc "had a life of its own" and wasnt working properly !

Rather than fit a Trail-Tech etc i wanted to wait unti an original working unit became available.

So now one has, but its advertised as from a Trails machine as opposed to being from an Enduro bike.

Is it likely to still 'fit' (Bar the fact i may need to make a new bracket) ? Will it not be a simple plug-n-play swap over ? Is the wiring completely different or am i just overthinking this one......

http://www.ebay.co.uk/itm/2514047665...84.m1438.l2649

Thoughts appreciated :)

sevenfourate 12-18-2013 02:14 AM

So no-one knows. Or perhaps no-one cares.....

Or maybe I've just alerted the GasGas World to a possible cheap Brand New speedo and your all going to keep quiet, but then out-bid me :D

Coop 12-18-2013 06:36 AM

I imagine no one knows. I am trying to learn and share as much as I can about the electrical system on these bikes but have zero experience with the OEM speedo's. Mine didn't have one on it when I bought it. I went with a TrailTech model for my bike.

Good luck and let us know how it works.

sevenfourate 12-18-2013 10:43 AM

Yea i will buddy.

Im deffo going to win it and give it a go i think !

I'll be sure to let the GG World how it ends.......

eff 12-18-2013 12:12 PM

That is an Acewell model. GasGas used them for like one year then switched tot he TrailTechs.

sevenfourate 12-26-2013 05:17 AM

Well - GREAT news.....im soooo chuffed !

The BRAND NEW and UNUSED trials unit i 'stole' from ebay for a measy GBP21 ($35) had a slightly different code / part number on the back - but the wiring was all the same and it fired straight up and all seems to work perfectly.

Rev-counter good, speedo registers and works when i spin the wheel round and ive figured out how to enter in the time, wheel circumference etc etc

My only "issue" is the speedo-head doesnt seem to hold the data (Well certainly not the time), when i turned off the bike and then fired it back up again.



Is there a re-chargeable battery in there somewhere that will charge-up once i go for a ride, or is there a battery in there i need to replace or............??

Garytee 12-26-2013 05:38 AM

Mine is the older style & has a 9v battery inside.


2004 EC 200

sevenfourate 12-26-2013 06:43 AM

Quote:

Originally Posted by Garytee (Post 125018)
Mine is the older style & has a 9v battery inside.


2004 EC 200

There is a couple of screws on the sides / wings behind where the indicator lights are - i'll have a look and investigate on the old speedo after dinner !

I did just fire the bike up again though, and its JUST the time that isnt stored. Wheel circumference, rev-counter settings, MPH etc are all 'remembered'.......

Cheers.

eff 12-26-2013 06:49 AM

There must be a battery somewhere. You may be able to get a manual on the Acewell site too.


Sent from my iPad using Tapatalk

sevenfourate 12-26-2013 06:57 AM

Quote:

Originally Posted by eff (Post 125020)
There must be a battery somewhere. You may be able to get a manual on the Acewell site too.


Sent from my iPad using Tapatalk

Thankyou.

I'll look porperly when ive had my Steak :-)

Acewell model 83XX series looks closest on their website........ Cant see any mention of a battery yet mind.

Still - ive got an avenue to investigate !


All times are GMT -5. The time now is 12:08 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org