roller bearing rear brake pedal
 

i was able to machine out my rear brake pedal to accept 2 roller bearings doing away with the sloppy bronze bushing . i was wondering if anybody would be into this mod i was thinking of offering a '' do it yourself kit '' if theres enough intrest , it would include the bearings spacers and drill bit to convert your brake pedal .

I would. Nice little winter project.

My KTM is like this and it's great. How about using a double row double sealed bearing instead of 2 bearings?

Count me in please

Count me in. Thanks.

blitz

Do you run work in a machine shop? If so we should talk. Several years ago, I designed a new pedal post and Les made up a prototype for me to try. Large separate frame mount (no through bolt) and grease fitting. Well, its still good and on my '07. Les felt it would be too expensive considering the volume of potential sales at the time. Maybe time to think about it again. I would however ask Les if he is interested first as he did spend his time on the one prototype.

Skidad,

The KTM pedal has a much larger dia "hub" area. The ball bearings you are thinking of will not work. I suspect mxdj is using needle bearings.

count me in for three!! I just replaced the entire assembly,and its still sloppy!

Glen,

Can you post a picture of your brake post setup?

i did take some pics but they where to big to post on here , when my girlfriend gets home ill get her to crop it so i can post it.

here is picture of brake lever with the bearing in it

heres the brake pedal