Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   General Discussions & Announcements (http://www.gasgasrider.org/forum/forumdisplay.php?f=7)
-   -   2011 ec 250 rims (http://www.gasgasrider.org/forum/showthread.php?t=23266)

Chris L 01-26-2018 10:08 PM

2011 ec 250 rims
 
Wondering if there is a rim from another bike that fits the front and rear of a 2011 ec 250?

Thanks

frankinberg 01-26-2018 11:08 PM

2007 on should fit

PEB 01-27-2018 12:21 AM

I had 04 rims on my 07

Elvis74 01-27-2018 11:57 AM

Every year fits you just have to change maybe the bearings


Gesendet von iPhone mit Tapatalk

Chris L 02-01-2018 03:16 PM

Ok so most of the gasgas rims will fit but is there any Honda etc rims that will fit?

Thanks for the help

cbutler 02-01-2018 08:49 PM

No not without modifying them

gasser 02-04-2018 11:01 PM

GG has the spoke holes drilled in a different pattern than other dirt bikes. Given "R" means right side and "L" means left, "F"means forward and "B"means back then the GG pattern is RF-LB-RB-LF. Jap bike pattern is RF-LF-RB-LB. To lace a Honda wheel to a GG hub you would have to fill and redrill half the holes on the rim (or hub). If you want to swap the complete wheel and not just the rim I suggest you look at Kawasaki kx wheels since I have actually seen one of those on the back of a gasser.


All times are GMT -5. The time now is 05:03 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org