Why Doesn't GasGas Have Online Factory Service Manual Like this?
 

Whay doesn't GasGas have an online Factory Service-Shop Manual and site like these? The shop manual below is 351 pages with labeled digital photos!

http://www.endurofactory.nl/pdfs/201..._250R-310R.pdf

http://www.husqvarnafactory.nl/pdf/index.htm

Ctoey
 

Has anyone seen a current GasGas factory shop manual like these Husqvarna manuals? I'm curious because the factory and or the bigger dealers must have one, right???

The answer to that is no.

Guys, are there any published torque values for the fasteners used on the engine and frame? I'm an old, experienced wrench, but there are torque/tightening differences that I would like to be aware of.

Thanks, Gordon

Not this old chestnut again...

Not again ... Still.

I just use a ktm manual.. yeah I do!

I'm not complaining. I just wish that Rod could chime in on this issue. Gasgas is spending money on advertising in national magazines so they seem to serious. They have a factory, they have employees that build motorcycles in that factory. What do these employees reference to build their bikes? A ktm manual? Look, if we can get a GasGas Factory online manual in Spanish, I speak Spanish so I would happy to translate it.

I saw the excellent Husky online manual and I wondered, "What a great time saving resource." I am not expecting Gasgas to expend funds to produce printed manuals. If Gasgas wants to build a strong dealership network, won't the technicians at these dealerships need a Factory service manual?

Rod, the ball is in your court, what do you say?

The man has a point, GGNA is trying to make the brand more accessible. This is a huge part.

If this helps these are for EC / MC / SM / 125 / 250 / 300 - 2005
I wouldn't think there would have been to many changes since then.

FRAME N-m

Brake caliper mounting bolt????25
Disc mounting screw???..???...10
Engine mounting bolt?..????.?36
Front axle bolt????...?????51
Front brake hose mounting bolt?..?6
Suspension clamp bolt??..????29
Steering nut?????...?????98
Rear axle nut???????.???98
Rear brake pedal bolt???????9
Subframe bracket bolt????.??26
Rear shock absorber bolt?????39
Rear drive plate nut???.????29
Spokes?????????????1.5
Steering stem nut????..????.4
Torque rod bolt??.???????81
Rear linkage bolt???...?????81


ENGINE N-m

Cylinder head screws??????..25
Cylinder nut??????????.25
Engine drain plug????????20
Kick-start pedal bolt???????20
Kick-start pedal nut???????25
Gearshift pedal bolt???????15
Spark plug????????..??.27
Water pump cover drain plug???9
Crankcase screws????????10
Starter pedal plate screw?????.8
Ignition motor stator screws????8
Ignition motor coil nut??????.40
Selector spring fixing screw????15
Primary nut??????????..40
Clutch spring screws???????10
Valve control support screws???..10
Valve control nuts????????..8
Reed valve screws????????..10
Thermostat housing screws????..10
Clutch housing screws??????..10
Valve housing screws???????.8
Ignition housing screws??????.10

http://www.manualslib.com/manual/386...s-Ec-2005.html