Wiring question EC 300 2010
1 Attachment(s)
Hi all, I am rewiring my 2010 EC 300 with a simplified wiring, and I am all good regarding lights, regulator etc.
However, the previous wiring was one huge mess, and now I am left with three loose wires coming from the CDI, as per attached picture: White/blue Black/yellow Black/white striped As per the wiring diagram I have: white/blue should go to the pin of the spark plug coil black/yellow should go to the ground switch (engine stop) black/white seems to go to the multifunction instrument, probably as a rev meter, so I can just blank it off/tape it, as i do not use any dashboard as per now. Can you please confirm? Thank you all in advance for helping out! |
1 Attachment(s)
attaching wiring diagram
|
Solved. White and blue goes to coil, black and yellow goes to kill switch, black and white is cdi ground and goes to frame.
|
All times are GMT -5. The time now is 12:38 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org