Supermoto.
 

Just a quick question as to what rims will adapt to our Gassers?
I assume anything will fit with the spacers being adapted or am I wrong.
I know the disc and sprocket need to be the same but do not know what that is.
Anyone done this or got the info?
Cheers Mark

Hi i used ccm 404 wheels. it came with a ccm bracket and i used a brembo caliper and master cylinder from a ktm or husky i think. i just swap it around.
i got some spacers made for the front
the back i changed the larger wheel bearing for the gg one and added the spacer that sits in between the two bearings and it all fits
the biggets tyre you can it on the rear is a 150 or it will rub on the swing arm

Attachment 2781

Attachment 2782

Attachment 2783

this is my 300 with the ccm wheels

Looks good mate.
Where would I get these CCM wheels and roughly how much are they?
Also, where would I find brakes etc and what should I be looking for?( I know you said brembe , but any specific type?)
Cheers Mark

Looks very nice.
I would like to get a similar set for mine. Could you please list the tyre and rim sizes for the front and rear?

Thanks:)

Hi Mark

i found my wheels on ebay, ccm is a British made bike, not even sure they are still being made, not sure if you guys imported them ether.
they use ajp hubs that is why i went for them so i new there would not be much to mod.
Talon make hubs for gg and rims the are a few to choose from. i just did not want to spend the same amount on wheels as my bikes worth lol
early ktm wheels i think may fit and Suzuki drz sm wheels might, huskys have the same spindle size i think and used ajp hubs. it just a case of research on what has the same spindle size.
regarding the brake again husky,ccm or early ktm bolt straight on. there is a fella here in the uk that can get a bracket made to fit the nissin caliper (?50 ruffly) as for wheel spacers i got my mate to turn me some out on his lave.
i will get all the part number and post them in a few days and the bits you want as well Harry

i nearly gave up on this, but fell together thank god, the bike is the nuts on sm wheels. well worth the hassle, if you guys need any help just ask an i will do my best

grant

Grant

Thanks mate , that would be great.
Cheers Mark

soz to keep you gents waiting, will get the info tomorrow for ya. just have not stopped

grant

I just bought a set of Morad motard wheels and all the kit as a kit from motocrosscentre in spain.
http://www.motocrosscenter.com
Antonio was great to deal with and they come in pretty well priced too.
Cheers Mark

Whats the postage prices like from them wence? That replica plastics kit looks horn!!