Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Electrical & Wiring (http://www.gasgasrider.org/forum/forumdisplay.php?f=19)
-   -   01 XC300 headlamp options (http://www.gasgasrider.org/forum/showthread.php?t=4431)

jhendr3702 04-07-2009 02:57 PM

01 XC300 headlamp options
 
i have an 01 xc300 with the 2k3 ignition and love the bike. We ride every once in a while at night and could use a little more headlamp. what are my options ..
jay

slocalspode 04-07-2009 06:27 PM

Ya might want to start here:
http://trailtech.net/lights.html
And if you are really serious:
http://www.touratech-usa.com/
I know some people that swear
by a single helmet light. They
do not ride fast open stuff, but,
tight single track and putting
around camp and to the outhouse.
They set up a connector like a headphone
jack with a coiled up strechie cord like on a
phone. Wire it into the bikes electrical
system with the plug up between the bars.
And mount the light on their helmet with
hi-strength velcro. If they fall the cord
detaches at the headphone jack so they
don't get choked by the wire.
I have been wanting one of these for some time:
http://trailtech.net/helmet_light_kits.html
I have an '02 XC300 converted to an EC300. Like you
I installed the 2K3 ingition. I also did the DC conversion
and added a sealed lead acid battery with a rectifier.
It now powers all the lights, signals and horn without
having the motor running. I may get one of the bar
mount halogen units one of these days.
Kind of like this one:
http://www.trailtech.net/3152-FX.html
Let us know what you come up with.
Good luck. Jeff So. Cal.

jhendr3702 04-07-2009 08:14 PM

thanks jeff. i have been looking at the trail tech lights also.
I ride with a buddy that has a wr450, the light on that bike is awesome.
i have rode the 300 with the stocker at night and anthing above a very conservative pace is pretty spooky..

jhendr3702 04-09-2009 10:00 AM

anyone tried these ??

http://www.gofasters.com/index.php?m...oducts_id=6316

gasgasman 04-09-2009 03:20 PM

Jay.
Do you have you head light wired up for high beam use only?
The two outer terminals on the bulb connector are for the high beam.

jhendr3702 04-10-2009 08:37 AM

it is on the two outer terminals.
could you run both low and high ??

gasgasman 04-10-2009 06:20 PM

Quote:

Originally Posted by jhendr3702 (Post 28830)
could you run both low and high ??

Won't put out much more light.

Go raid your parts dept and find a HID bulb with the ballast and rig that up. :D :D

jhendr3702 04-13-2009 09:29 AM

that's a thought... will keep a look out for one of those.

gasgasman 04-13-2009 02:59 PM

Your friendly body shop may have 'em.:D


All times are GMT -5. The time now is 09:21 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org