Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)

- Enduro Electrical & Wiring (http://www.gasgasrider.org/forum/forumdisplay.php?f=19)

- - Multifunction switch (http://www.gasgasrider.org/forum/showthread.php?t=24556)

Rman227

06-24-2019 10:26 AM

Multifunction switch

Hey all, would like to ditch the large multifunction starter/horn/headlight, etc switch on my 18 ec300. Does anyone know if the 19 starter button will plug directly in? Or if there is an aftermarket, smaller assembly that will work? Thanks

john r b

06-24-2019 02:51 PM

Trail Tech

Wuzofoz

06-25-2019 02:00 PM

1 Attachment(s)

I made up this plug to replace the original harness. Headlight is hard wired to low beam and the 2 smaller plugs are for starter button and fan.

avlolga

11-09-2019 02:37 AM

Wiring

Hi Wuzofoz
Do you have or can you share a wiring diagram?
the guy I got the bike from replaced the original SW with only start engine sw.
I have to wire all back to the original.
He make changes that I like restored to original
Thanks

All times are GMT -5. The time now is 12:49 AM.