Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Suspension (http://www.gasgasrider.org/forum/forumdisplay.php?f=16)
-   -   2009 450fsr sachs shock rebuild kit (http://www.gasgasrider.org/forum/showthread.php?t=24412)

schlitzy 04-19-2019 02:48 PM

2009 450fsr sachs shock rebuild kit
 
Anyone know where I can get all the parts to service a Sachs shock on a 2009 450fsr? In the States if possible.
Thx

rvktm 04-22-2019 08:35 PM

i used a skf seal block on a 010 two stroke one or look to see if racetech do a block did look at fitting a different seal to the std block showa kyb wp use the same seal on there 18 mm shock good luck

Jakobi 04-23-2019 06:04 AM

Quote:

Originally Posted by schlitzy (Post 189704)
Anyone know where I can get all the parts to service a Sachs shock on a 2009 450fsr? In the States if possible.
Thx

The sachs seals are pretty resilient.. Is yours actually leaking when under full pressure? How does the shaft look?

Getting a seal or complete seal head for a Sachs can be a pain in the ringbit... Most tuners will mill the stock seal head to take a KYB/Showa seal, otherwise SKF do a complete seal head. You just need to be sure on which one you need. Sachs use 16 and 18mm shafts.. some use top out spring assemblies, while others have a bump stop on the seal head. Few different height seal heads getting around too!


All times are GMT -5. The time now is 12:21 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org