Interchangeable parts what years?
 

School me on what parts are interchangeable on 18 and 19 GG 250cc and 300cc

What years are plastic fit? Do 17 and earlier fenders fit? Pretty sure shrouds are a no.

I found that a ktm chain guide fits my bike.

I also have an excel a60 ktm rim laying around, will this lace to my gasgas hub?

https://i.ibb.co/XLYFfNL/20200503-081939.jpg

Earlier model plastics will not fit up to the 18+ model years. You should be able to buy plastics for the 18+ bikes from Reiju through US dealers soon.

No, the KTM rim will not lace up the Gas Gas hubs. Not sure if it could be "made" to work. Others may know..

Sprockets for earlier model huskies and some other brands (Sherco? Beta?) will work on the Gassers.

Sharp looking bike!

I hope this helps.

This is helpful thanks. So no aftermarket plastic options?

Polisport do them.

What years are plastic fit? Do 17 and earlier fenders fit? Pretty sure shrouds are a no. :
Rear no, front may not match up with numberplate/headlight shell.


I also have an excel a60 ktm rim laying around, will this lace to my gasgas hub? :
only way to match it to a GG hub is to weld shut every other spoke hole on the hub then redrill it at the opposite angle(front to rear angle not side to side)

Kickstart lever - some Yamaha models

Front sprocket - All years 99- 2019 interchange on 2stroke enduro models excepy the 125 which takes a 125 yz yamaha

Rear sprocket - not the vintage huskies but the the years just before ktm took them over. 90 -93 250/350 Suzuki drz "S" model will fit (must be the "S" model) Rocky Mt has them in 43 and 49 tooth steel for about $20

Hi Guys I have a 2018 xc300 -any idea what yamahA YZ Kickstarter fits please ?

Yours break?

Sharp looking toy! :D

If it fits your 2018 it will fit my 2019 too. Have you got the KTM part number or do you know the exact KTM model please?

Doc, I believe all of the newer KTMs have the same mounting points for the chain guide as the 18-19 Gassers. My buddy has a 2020 KTM 300XC and when he bought the Bulletproof Designs chain guide swingarm guard, the part numbers on the packaging showed that it also fit our bikes and I think even the newer Shercos.