20mm thread (04-early 06) front axle nut conversion
 

Due to many requests we have started to make a front Hex Head axle nut again to suit the 2004 - early 2006 bikes (20mm threaded axle). If you are not familiar with this, it converts your allen key front nut to a 'Yamaha style' 22mm hex nut. This means you can carry a Yamaha 22/27 spanner to take your wheels out and throw away your allen key.

http://www.mainjet.com.au/product_in...5658ed0731590e

Also see the spanner & nut kit available. http://www.mainjet.com.au/product_in...roducts_id=290

We also stock the later model kit to suit late 2006 - to current years with a 22mm threaded axle.

Nice...can you figure shipping to Hawaii...I might take 3 of them, PM me
TKS

I have these on my bike, great setup. good with the spanner also as it does the plug and front and rear axle.
I also grabbed th eaxle puller for the front.
Cheers Mark.

Any way I can tell which nut I need with out pulling the axle out and measuring? :D

I have an 06 with zokes forks.

If I were you Brian, I would PM Keg, He will know what to supply you.
He is not too bad a bloke either.:D
Cheers Mark

Thanks Wence,

Check freight here: http://auspost.com.au/index.html

It would be $10 or $15 for all internationally deliveries for small stuff. I think our web site tells you it is $20 automatically, but I manually charge it so I try to make it reasonable.

Brian, just take the axle nut out and measure the thread. It should be about 20mm or 22mm.

Last ride my front axle nut decided to disappear :/

Tried to order from the website and it is saying "No shipping available to the selected country". Is it true?

I'd really like to use a socket instead of an allen key on my front axle.

I got the same message. I would like to purchase the shift lever.