Can you post a picture of the vforce reed cage?
|
I have a separate cap that the same thing happened to. I made a cork gasket for it. Ill ship it to you for $10
|
I have a separate cap that the same thing happened to. I made a cork gasket for it. Ill ship it to you for $10
|
What engine are the cranks for?
|
Yard sale
Im interested mainly in the 05 frame, do you any paperwork for it ?
I'd also be interested in the tranny, Vforce, rear brake setup, and the clutch cover if it's in magnesium (off 2005 or newer) and not banged up all for $250.00 plus cheapest freight option. Building a Timber Sled based on a 2014 electric start 300 motor I got from Christini. the clutch cover was cracked in shipping, they did a crappy job of packing it and did'nt bother to drain the oil. What a mess ! can you take some pics and email to me @ ntms1@sbcglobal.net also you can best communicate with me via email I seldom explore the forum it's such a time Bandit. Thanks ! Gasser |
Cranks are from an 05 and an 07 300
|
Updated prices.
|
Hi, I would very much like a crank shaft as mine has a worn groove where the seal runs. I'd also be interested in some other parts if they're still available.
I will message you. Julian |
Bump for updated list.
|
Hey Paul, on the transmission, is the countershaft the one the Drive sprocket mounts to? or the one the clutch mounts to?
|
All times are GMT -5. The time now is 02:58 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org