Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Parts (http://www.gasgasrider.org/forum/forumdisplay.php?f=58)
-   -   Tired of looking at this stuff sale (http://www.gasgasrider.org/forum/showthread.php?t=23566)

PEB 05-14-2018 11:34 AM

Tired of looking at this stuff sale
 
2 sets of center cases- $50 for each set
crank shaft- $30
Basket ring gears, large bore suitable for Barnett basket $20


Bent radiators $Free
rear axle with adjuster blocks $10
Fuel tank $15
swingarm with linkage and rocker $30
2 frames make offer

PEB 05-14-2018 07:41 PM

All parts came off either an 05 or an 07.

frankinberg 05-14-2018 08:30 PM

Pm me a price for everything shipped to 80602

Brian VT 05-15-2018 06:16 AM

I'll take one of the swingarm sets, please.

gasman88 05-21-2018 04:14 AM

Stock gas tank? How's the condition?

jimjim 05-22-2018 09:14 PM

I would like to buy the master and slave bodies for 20.

gasman88 05-28-2018 08:57 AM

PEB still have the tank? 05 with 07-11 plastics and subframe/ airbox.

PEB 09-08-2018 02:24 PM

Still have all this stuff. Seems like my prices are rock bottom, but I will make deals if you combine stuff. ANyone want the whole lot?

redman13 09-09-2018 07:41 PM

What condition is the rear axle in ? If not worn I'm very interested.

Thanks

smallpuffydog 09-09-2018 09:02 PM

Quote:

Originally Posted by PEB (Post 183154)
2 sets of center cases- $100 for each set
2 crank shafts- $50 for each
Basket ring gears, large bore suitable for Barnett basket $20
6 speed transmission, needs new counter shaft $50
Boyseen Reed cage $25
V force reed cage $35
Rear brake setup. Pedal, master, slave, carrier, $65
Rear brake parts. Master and slave bodies $20
Front brake setup. Master, slave, lever, line $65
Clutch cover $20
Bent radiators $Free
rear axle with adjuster blocks $10
2 power valve ball ramp assemblies $20 each
Domino throttle housing shell $15
Fuel tank $20
swingarm with linkage and rocker $50
2 frames make offer

Does the tank have a cap or do you have a cap that you would sell separately?

The ethanol gas ruined the rubber boot inside the cap and now my cap leaks.

Moto7man 09-10-2018 03:24 PM

Can you post a picture of the vforce reed cage?

PEB 09-10-2018 06:13 PM

I have a separate cap that the same thing happened to. I made a cork gasket for it. Ill ship it to you for $10

PEB 09-10-2018 06:14 PM

I have a separate cap that the same thing happened to. I made a cork gasket for it. Ill ship it to you for $10

Thompo 09-11-2018 01:37 AM

What engine are the cranks for?

Sierra Gasser 09-12-2018 02:22 AM

Yard sale
 
Im interested mainly in the 05 frame, do you any paperwork for it ?
I'd also be interested in the tranny, Vforce, rear brake setup, and the clutch cover if it's in magnesium (off 2005 or newer) and not banged up all for $250.00 plus cheapest freight option. Building a Timber Sled based on a 2014 electric start 300 motor I got from Christini. the clutch cover was cracked in shipping, they did a crappy job of packing it and did'nt bother to drain the oil.
What a mess !
can you take some pics and email to me @ ntms1@sbcglobal.net
also you can best communicate with me via email I seldom explore the forum it's such a time Bandit.
Thanks !
Gasser

PEB 09-12-2018 03:57 PM

Cranks are from an 05 and an 07 300

PEB 10-09-2018 01:55 PM

Updated prices.

julian5000 10-14-2018 02:22 AM

Hi, I would very much like a crank shaft as mine has a worn groove where the seal runs. I'd also be interested in some other parts if they're still available.

I will message you.

Julian

PEB 11-05-2018 04:55 PM

Bump for updated list.

jprizz 11-06-2018 07:59 AM

Hey Paul, on the transmission, is the countershaft the one the Drive sprocket mounts to? or the one the clutch mounts to?

PEB 11-10-2018 12:15 PM

the one the drive sprocket mounts to.
Quote:

Originally Posted by jprizz (Post 186898)
Hey Paul, on the transmission, is the countershaft the one the Drive sprocket mounts to? or the one the clutch mounts to?


Sierra Gasser 11-27-2018 02:53 AM

Offer for 2005 Frame
 
I'd be interested in the 05 frame if it's in good condition $100.00 plus freight
Please contact me via Email :ntms1@sbcglobal.net

icebergstu 03-07-2019 05:05 PM

Do you have a kick shaft mechanism/spline/spring etc...?

Sent from my SM-N950F using Tapatalk

PEB 06-07-2019 10:12 AM

Bump to the top with new lower prices

wiggy43 06-15-2019 05:39 PM

Rear Brake parts
 
Hi,
I need all the rear brake parts if you still have them. Please call or email. Have urgent need.
248-880-8873 or pmroboman@gmail.com
Thanks,
Phil


All times are GMT -5. The time now is 10:26 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org