Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   GasGas Member Polls (http://www.gasgasrider.org/forum/forumdisplay.php?f=6)
-   -   Handle Bar Width (http://www.gasgasrider.org/forum/showthread.php?t=12801)

Edman 07-09-2012 12:47 AM

Handle Bar Width
 
So at what length do most of us run their bars?

29"
30"
31"
32"
or other and why?

swazi_matt 07-09-2012 03:02 AM

std width because i have never felt the need to go narrower (no forest riding)

GasTimppa 07-09-2012 03:41 AM

I use Renthal 999 handlebar. It is 805mm (31,7"). Fits to my riding style best. I tried original 997 (again) and switced it to 999 (again) :o

Punk 01-13-2014 05:49 PM

Bar Width
 
28" Flex Bars . Any wider and you couldn't get through some of the trees.
Punk

Gas-gas52 01-13-2014 06:49 PM

28" is a good for eastern KY. Any wider and you will be tagging trees. After you ride with them for a while that's all you will have. Pro tapers woods low for me.

Coop 01-13-2014 07:48 PM

28.5" just to be different. Seriously you need your bars cut down in SW Pa just like others have mentioned. Some bars it's tough to fit everything on when cut down. I've used mini bars in the past because they often have longer flats for room for controls once cut down.

bowhunter007 01-13-2014 08:19 PM

I voted 29" but mine are actually 28.5" Point and scoot through the trees.

bkwdc 01-14-2014 05:37 AM

30" here in east tn. I like the extra room on the bar for controls. With the twisted engineering bars, the guards dont add to width. So, 30" bars =30" width overall.

celler 01-19-2014 05:13 PM

I voted 30 but I keep going wider over time. I have 31 on the latest bike.


All times are GMT -5. The time now is 07:49 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org