Looking for a gas cap for my 2011 EC 300
I looking for a gas cap for my 2011 EC300.
Somehow the rubber piece under the cap got deformed and now won?t seal. |
I cut a piece of 1/8" cork to add to my existing rubber gasket to deal with the leaking, and it worked perfectly. I found that the outside shoulder of the cap hit the recess shoulder of the tank before the gasket seated. The extra 1/8" worked perfectly. Maybe try some 1/4" or two layers of 1/8" cork to replace or supplement your rubber gasket.
Edit: I had a 2011 EC300 as well. |
I recently bought a new gas gas gas cap from www.gasgaspartsguy.com
|
I have a spare one. There was an updated cap and an older one. In the end I simply pulled out the seal and found for all purposes the plastic on plastic seals well enough.
|
Thanks guys, I’m going to try pulling the rubber out and replacing it with a cork seal
We have a lot of steep climbs and descents here and on my last ride I had a pretty constant smell of raw gas and a muddy mess around the cap. |
All times are GMT -5. The time now is 11:45 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org