Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Other GasGas Bikes/Quads (http://www.gasgasrider.org/forum/forumdisplay.php?f=34)
-   -   How to drain Pampera coolant (http://www.gasgasrider.org/forum/showthread.php?t=21455)

Blambo 05-25-2016 11:38 AM

How to drain Pampera coolant
 
Hi,

Unlike the EC, there's no Service manual on-line for the Pampera 250 2-stroke (mine's a 2002 mk3).
So, please can someone tell me how to drain the coolant ?
The EC has a drain hole on the pump-cover, but the Pampera doesn't.
Do I take the whole water pump cover off ?
This seems logical, but I don't recall doing this before (it's been a loooong while, as the bike wasn't used for years) and I'm nervous about needing a new rubber seal for the cover as Pampera spares are not easy to get these days.
Thanks for any help,
Mike in the UK

Neil E. 05-25-2016 04:45 PM

Instead of disturbing the cover, what about removing the lowest rad hose connection and leaning the bike over to get the coolant out?

cbutler 05-25-2016 05:33 PM

The Pampera has a trials motor. I just looked at my 01 TXT 280 and it is a Phillips screw just behind the front bolt on the cover.

Can you post a pic. ?

Blambo 05-26-2016 06:14 AM

Those connections are crimped on, one-time use. Best left alone...

Blambo 05-26-2016 06:15 AM

The Pampera pump cover has 2 allen key bolts. Nothing else. I guess I just remove it...


All times are GMT -5. The time now is 11:29 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org