Trouble shifting into 2nd
I am having lots of trouble shifting from 1st to 2nd or from neutral to 2nd. Almost feels like the shift lever is stuck when I try to shift. It is fine shifting throughout the rest of the gear range, and fine when shifting down into 2nd from 3rd. I am using rotella T4 15-40. Could it be a mechanical issue or maybe just oil related. Maybe I can add some ATF to see if it helps?
|
I would pull the outer clutch side cover off and look at the shift scorpion.
They can develop a sharp edge that would hamper shifting. |
Quote:
Are you talking about the star shaped part? I have no clue what is meant with "scorpion"... |
Yes.
Should be obvious when you look at it while shifting. |
Ok I will check it out. Are you referring to part 22/22A ?
http://partsfinder.onlinemicrofiche....20TRANSMISSION |
Part 22 is the sprocket.
The scorpion is attached to the shift shaft. Will be on the right side, below the clutch basket. |
|
1 Attachment(s)
I took what I thought was the clutch cover off and do not see what everyone is talking about. Obviously I have taken off the wrong cover, I am looking at the clutch plates. Where do I need to be looking? Am I going to need to do a lot of disassembly before I?m able to pull the correct cover off?
|
The entire cover has to come off.
Drain the coolant. Arrange the bolts as you remove them. Different lengths. Leave the water pump and kick start gears intact. |
|
All times are GMT -5. The time now is 07:53 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org