Part-Out 2010 300 and 2009 200 SOLD
 

UPDATED 9 18 16

All prices do not include shipping. I think (and hope) that my prices are reasonable. I don't want to make a fortune off this stuff, just a fair deal for both parties......and I want it out of my garage ;)


2009 200 50hrs on the bike. Parting-it-out due to the motor attempting to commit suicide.

Send me a PM or Email (preferably with the part you are interested in and your phone # ) and I'll gladly text pics. Texting is simplest for me.

Engine minus Stator (top end, bottom end, reeds) AS IS Piston and Cylinder damage-not sure what happened. Besides a lack of low-end the bike ran fine, I happened to find the cracked piston when I decided to measure/adjust squish. Engine was actually running fine, have GoPro video of the last ride.. (09' 200)
$400

Pipe OEM. One small dent (09' 200)
$100

P3 Pipe Guard 200/250/300
$75


Oversized PV Cover- this is the one machined by the guy on this forum. It is two separate spacers, uses OEM Cap.
$40



Sachs Shock. (09' 200) Sprung for 200lb rider weight. Valved for rocks/very soft. 09' 200
$150

Triple Clamps. Top Clamp is the GPR Stabilizer Mount Clamp Includes Collar/Pin $150. (09'200)

Triple Clamps OEM (10' 300)
$70



Wheels (front and rear) 09 200. $300. One small dent to rear rim.
Wheels (front and rear) 10' 300 $300


10' Plastics (not including actual/glass headlight). White. Custom Graphics
$50
09' Plastics OEM.
$50

Scorpion Rad Guards (09' 200) $75

OEM Radiators. (09 200')
$150

Plastic Frame Guards (just above pegs) 10' 300 + 09' 200
$5 each

Front Brake complete with lever (09' 200) $150

Aluminum Skid Plate $40 (09' 200)

Rear Brake complete with lever (09' 200) $150

Clutch complete, MC, Slave, Lever and Line
$100 (10'300)

Clutch complete, MC, Slave, Lever and Line
$100 (09' 200)

OEM Tank with Cap and Petcock. (09' 200)
$50

Carb OEM. Jets, Needle, Motion Pro +3" and Throttle included $150 (10' 300)

Carb OEM. Jets, Needle, Cable and Throttle included $140 (09' 200)



Subframe (metal portion only, no plastic/airbox etc) 10 300 $150

Frame with Title $200 (09' 200)

Swingarm- has defect where a bolt that was too long (installed by yours truly) wore into the material. Bearings and Seals are new $50 (10' 300)





Airbox $ 20 (10'300)


Full Linkage $100 (09' 200)

GPR Sub-Mount kit (including collar and post). Stabilizer not included. (10' 300). Also have smaller I.D. Collar. Fits many years
$50

TwinAir Air Filters (2) -used but life left in them $5 each



OEM Chain Guide $5 (09 200')


OEM Bar Mounts $10


Rad/Engine hoses $5

Bucket of Bolts. 75% of the bolts, nuts, fasteners, etc. Basically all the bits left-over after the part-out
$40

Rear Brake Lever (09' 200)
$40

Kickstand
$50

OEM Handguards/Plastic Deflectors (removed at 5hrs) $5 (black, 10' 300)

Wiring Harness with Stator $250 (09' 200)

Sicass Dual-Sport Lighting Kit. Headlight (bulb) included. LED rear turn signals, LED front hand guard turn signals.
$200

New Rear Pads EBC $ 10 ?

Front Brake and Clutch Levers (worked on my 09 and 10)
$15

Can you post a couple of pics of the bike's being parted out.

Let me know what you want for the kick starter for the 200.

Thanks

Rick, the motor might be sold. Let me see what his expectations are for the kick starter. If he doesn't want it, how about $30 + shipping?

J

I will take

OEM Throttle Cable $10
OEM Chain Guide $5 (09 200')

Do you have pegs ?

Ooh, yes. Thanks for the reminder. I have 10' pegs with the bracket cut (to facilitate lowering them) and I have non-altered OEM pegs from the 09' 200.
$30 for either set of pegs

You PayPal friendly? PayPal address: husley7374@aol.com + $10 for shipping 👍

non-altered OEM pegs from the 09' 200.

$55 coming your way

how about the rubber strap at the back of the tank

I'll include it in the box ...maybe add a note in PayPal to remind me

J

Sent thank you

The price is right....keep me posted.....