GPR stabilizer.
 

Gas Gas under mount unit.


I'll post pictures when I get it mounted.

http://www.thumpertalk.com/forum/att...1&d=1202953268

Looks like someone is el-cheapo on the server. :)

Huh? :confused:

That's the new GPR V4 damper? Looks nice and very low profile. We will need a review also.


Skidad in MA

The bike is supposed to appear tomorrow. I'll get it mounted and some pictures posted.

You better smile when you are saying that! :cool:

Image tags are enabled here - I use them all the time... I believe that in order for image tags to work it has to be a recognized file extension (jpg, gif, etc.)

jeff

There's an option in vbulletin to allow image tags on other file types. If I search the properties for the image I posted and insert it between the image tags I should see the picture displayed.

Here's my post that I originally posted on TT. I just inserted the thumbnail properties between the image tags to show the larger picture.

http://www.thumpertalk.com/forum/sho...74&postcount=1

How much are they going for? I want a sub mount for my Scotts, might just sell the Scotts & get one of these.

I just finished mounting it. The post assembly interferes with the fuel line tap in the frame. A 90 degree elbow would fix it or you can cheat and use a longer line tied by the radiator. I think that's what I will do.

The plastic collar under the top triple clamp needs to be cut down. I don't think GPR has a proper replacement yet which is no big deal. I cut it too thin so I packed it with waterproof grease. I'll order another one and be a bit more careful with my cutting.

There's 2 positions on the top triple clamp. It bolts in the rear set of holes. I'm pretty tall so I'm going to check with GPR for a longer arm so I may use the forward set of holes. Being a submount it increased the height of the bars a little over an inch. Good for tall guys.

I think you will have to contact GPR to get a part number to order the submount and post kit. The top clamp spacing is 100/40 which allowed me to bolt on a set of Fastway FIT handguards I had laying around for a Yamaha.

I have to hand it to GPR, they stay on top of things. I like that they are using the stock triple clamp.

Thanks. I double checked and see no such option.

They are running a newer version of vbulletin over there - looks like it is time to upgrade...

By the way, just to spam for one of the sponsors here, Motosportz also makes a damper that will mount to the gasgas. www.motosportz.com

jeff