GasGas Bolt Kits?
 

My bolts on my gasser are looking well past their best - Does anyone know of a kit like these but for a 2006 gasgas EC250?

http://www.clarkemfg.com/cart/index....roducts_id=213

Thanks.

im just going through the same on mine, i am going to order a pack of 400 allen head nults/bolts/washers and will replace every nut and bolt i can find on the bike, apart from engine and anything brake related!

should be a lot easier and neater then.

Go Fasters has a bolt kit, but I cant say how comprehensive it is. Hard to tell from the lousy pic... it looks like they are hex head flange bolts which are stock. I'm sure a call would clear that up. I prefer stainless allen bolts.

http://www.gofasters.com/index.php?m...roducts_id=308

Some real hardware stores have SS allen bolts, but real hardware stores are harder to find than SS allen bolts so I ended up going to a commercial fastener supplier and loading up on common sizes.

Don't overlook your local boating supply store such as West Marine. They carry many types of stainless fasteners also. Probably not as inexpensive as the local fastener company though.

Yup,
Even "real" hardware stores are VERY high when compared to a "wholesale" fastener company. One-zies at hardware stores are easily 10x the price at wholesale. I can understand that as inventory at retail level is a total nightmare. I can imagine a marine dealer would hit you even harder than a hardware store.

Other thing is I wouldn't classify West Marine a "local" boating store. I was just in TN or KY and was surprised to see a West Marine store just like the one we have in Mpls. I was unaware that it was a national chain, but then again I have little reason to frequent marine dealers.

http://www.demonmx.co.uk/contents/en...d=39881.847222

http://www.demonmx.co.uk/index1.html

;)