Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   United Kingdom (http://www.gasgasrider.org/forum/forumdisplay.php?f=27)
-   -   six days decals set (http://www.gasgasrider.org/forum/showthread.php?t=6973)

dareuk 03-14-2010 02:29 PM

six days decals set
 
is there any where i can get a set of the six days decal sets iv looked every where but no look thanks

Todd5774 03-15-2010 12:56 PM

Best bet would be to contact gasgasuk direct, as they will probably be the only one's to stock them.

Elvis74 03-21-2010 04:36 AM

Hi,

ask here:
http://www.trialendurodirect.com
http://www.gasgas-online.de
http://www.gasgas-werl.de

dareuk 03-23-2010 09:38 AM

thanks elvis for the reply but i tried all those sites with no luck weeks ago :( i may just have to get a custom set made to look like it i supose any good sites? my bike is a 2001

Todd5774 03-23-2010 10:26 AM

If its of any interest the 2010 rad shrouds can be made to fit very easily, then just ring gasgasuk and ask to buy the sixday decals for this year.

dareuk 03-23-2010 03:42 PM

really sounds interesting dose the gofasters site load up really bad for any one eles or is it just me ?

Todd5774 03-23-2010 04:17 PM

I can never get on with the Gofasters site, i have found in the past that it is just easier to ring them instead.

This is what i fitted to my 02 ec300- Black 2010 shrouds with the 'Team Uk' decals available from trialendurodirect.com

http://i255.photobucket.com/albums/h...dgasgas004.jpg

All the holes on the 2010 shrouds line up its just a slight trimming of an edge on the back which you cant see at all from the front or side that is needed to make them fit.

dareuk 03-23-2010 05:23 PM

wow thanks alot todd will deffo look in to getting this done wish i could fit the newer body work on the rear as well can i just get an 07/08 rear subframe and bolt it on and stick some new body work on or is it not as simple as that lol

dareuk 03-23-2010 05:28 PM

where did you get the 2010 rad shrouds from ?

Todd5774 03-24-2010 03:37 AM

You can fit the 07 onwards bodywork to an earlier bike, but you do need to change the subframe, airbox and seat, as well as buying the plastics..

On my to-do list this year if i can track down the parts!

Get all my plastics from http://www.ad-tekproducts.co.uk/acat..._Plastics.html

But rather than buy it online, its much easier to ring them up and specify exactly what you want, very helpful and very reasonably priced.


All times are GMT -5. The time now is 12:52 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org