2007-2008 spark plug
Can anyone tell me the correct spark plug for my 2007-2008 EC250 please?
All my manual gives is a plug gap of 0.7-0.8mm no mention of the actual plug. Thanks. Sent from my iPad using Tapatalk |
https://www.motocrosscenter.com/pdf_...m_partlist.pdf
go to the electrical section. recommends Denso W24ESRU which can be replaced by BR8ES which is pretty standard for other years moving forward |
Perfect.
Thank you. Sent from my iPad using Tapatalk |
I'd recommend the NGK over the Denso. I've used the the BR8EG and the smaller center electrode performs much better than the wide electrode of the Denso.
|
Quote:
Thanks for the advice mate. Sent from my iPhone using Tapatalk |
Yep, NGK all the way. I prefer the standard BR8ES but that's just me. I replace them once a year just because I feel I should replace it.
|
I use the BR8EG cause my manual (EC 250 2009 ) recoments only that one but now i would try the BR8ES .
Question does anybody use mapgas to clean their BR8EG ? I saw youtube video of Allen Milyard doing it but on standard plugs . |
Never tried cleaning a plug as it's just easier to buy a new one. Plus, I don't feel like wasting good MAP gas on it!
|
I've done it on plugs fouled by a fault on 4 stroke , but it doesn't fix an old plug just buy new.
|
All times are GMT -5. The time now is 01:58 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org