2018 GG EC250 riders help please.
Anyone got a jetting combo for a post-cut head?
Squish 1.35mm. |
did you ever just trynthe Beta jetting in your gasgas? I used the Beta jetting chart on my 300 gasgas and it run great!
|
I have the RK Tek head running 1.1mm squish and domed for race gas. Currently I’m running VP110 and Amsoil Dominator @50:1. N3CH needle 182m and 42p. Stock Slide slightly cut. Bike is nice and clean from bottom to top
Sent from my iPhone using Tapatalk |
Put it in a dyno??
|
All good. Slide was sitting too high in the carb, giving a closed throttle lean condition. Weird, as the bike was idling fine at a/s 1.5.
Rode this morning 14c, 100m ASL, NEDW#3, 42p/175m, a/s 1.5, Motul 710 @ 2% in 98RON. Smooth, quiet & grunty power all the way. Case closed, nothing to see here, very, very happy this saga is over! Keg, thanks for your help with TSP/pistons/etc, etc. |
Great to hear it is all sorted.
|
Why doesn't your bike spooge anymore? I think you should try another oil again :D :D :D :D :D
|
All times are GMT -5. The time now is 09:05 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org