TPI oil ???
 

Hello all ! I just purchased a 2021 KT...er I mean...GAS GAS 300 EC. (don't beat me up too bad, I've owned '97 250 EC, '99 200 EC, 2000 250 EC, 2000 250 MC with 4speed tranny). My first TPI bike and I have narrowed down my injector oil to MotoRex CrossPower 2T, Maxima K2 Injector, Motul 710, and BelRay Si7. Just wondering if anyone on here has actually used any of these oils in a TPI bike and what they think ? Thanks !

BP

To be honest this forum is pretty much just the real gassers... 😜
Probably easier to check the orange forums. Pretty hard to pick a bad oil these days though. Not like how it was 20 years ago. As long as it is marketed for purpose you should be good.

Maxima just responded that their K2 Injector is not Jaso FD certified. Just FYI.

Those are good oils. I am running Polaris ves gold. Sled oil
Been running for years. It was designed for.injection but used to use it on my carb bikes and always had great success. And it's only about 45 for a gallon

Can you use outboard motor injector oil?

I have a 22 xc250 and run motul . It's also what I use in my 23 ranger 300

I use the Maxima K2 Injector oil in my TM. Buns clean, appears to lubricate well. I am sort of a maxima fan boy, so you might want to take that with a grain of salt.