2012 EC300 E-start
SOLD
I have a new bike in the garage so this one has to go. I went through the whole thing this summer and put a new top end in, serviced the forks, and prettied it up a little. Bike has 182 hours The Good: -New top end -Newer plastics -Spare shroud and rear fender Sticker Set -New Excel front rim and spokes -Galfer Floating Rotor -Aluminum Rear Subframe -Shock revalved and rebuilt last winter -Shorai LiI battery -TM chain guide -TM skid Plate -TM chain slider -Recluse clutch cover -New grips -New tires -Rear Tugger Strap -Some random extra gaskets and spare bits The Bad: Been ridden like an enduro bike was meant to be ridden. Not the prettiest bike, has plenty of scratches on the swing arm and rims, pipe has some dents, mechanically sound though and ready for a couple hundred more hours. Rear sub fender has been shortened to remove tail light and be more flexible. SOLD https://farm6.staticflickr.com/5705/...be721089_c.jpg https://farm6.staticflickr.com/5823/...de3ae616_c.jpg |
bump with updated post and pictures, new bike is here, time for this one to go to a new owner.
|
Location?
|
Oops, should have put that in the OP.
Bike is in Durango CO. |
Bump $2500 for board members
|
bump $2000? considering parting it out at this stage.
Maybe I should just keep putting hours on it... |
Bike
Pm sent re bike
|
Do you have a title ?
|
I have the mso, never titled it for street use.
|
I think you would get a lot more then 2k parting it out. Just my opinion. It amazes me how expensive parts are and how cheap you can buy a whole bike for.
Sent from my iPhone using Tapatalk |
All times are GMT -5. The time now is 07:48 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org