Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Electrical & Wiring (http://www.gasgasrider.org/forum/forumdisplay.php?f=19)
-   -   ec 250 kill switch wiring (http://www.gasgasrider.org/forum/showthread.php?t=25154)

Reverendjim 05-11-2020 01:11 PM

ec 250 kill switch wiring
 
Hey all, i have been looking at wiring diagrams but mine doesnt seem to match...I have an 01 EC250 that had all lights taken off.

I am trying to wire up a kill switch, as it does not have one.

Wires i have are:
2 purple or violet colored wires
a Yellow wire
a Yellow w/ green stripe wire
a yellow and a white wire that go to a connector together

anyone know this answer?

Reverendjim 05-11-2020 02:03 PM

updated
 
nearest i can tell"
2 purple or violet colored wires - no clue
a Yellow wire & a Yellow w/ green stripe wire - horn
a yellow and a white wire that go to a connector together -brake sensor

according to other posts kill should have a black or grey wire which i dont have (or cant find)


All times are GMT -5. The time now is 01:36 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org