Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)

- Enduro Electrical & Wiring (http://www.gasgasrider.org/forum/forumdisplay.php?f=19)

- - 2018 ec250 cdi swap (http://www.gasgasrider.org/forum/showthread.php?t=26153)

Jim_C

06-13-2023 12:46 PM

2018 ec250 cdi swap

Gents,

Does anyone know if I connect a 2012 EC250R CDI in my 2018 EC250 for a spark test cause any mapping problems later? Lost all spark in my 2018. Disconnect kill switch and no spark. Tested spark plug cap with Ohms meter and looks good.

Want to use the 2012 CDI just for Test.

Jim_C

06-22-2023 12:17 PM

Buddy has a 2018. Plugged in his CDI and fired first kick.

(F5)	06-22-2023 02:21 PM

That sucks but also doesn't, you know what's wrong. If you cant find another an Ignitech may be the path forward but not plug n play.

pigpen966

12-02-2023 02:13 PM

What's the part number? My 19 just went tits up, had a good one from my 18, different part number. Plugged it in, fired right up. Mapping must be different cause it just wouldn't run clean. Guess I'll have to bite the bullet and order a new one. $350:eek::eek::eek::eek::eek::eek:

gasgasman

12-02-2023 08:16 PM

The flywheel is different on the '19 bikes. So the CDI is different too.

pigpen966

12-03-2023 05:55 AM

Quote:

Originally Posted by gasgasman (Post 202552)

The flywheel is different on the '19 bikes. So the CDI is different too.

This spare is from a 18. Won't work with my 19. I think it's the CLK-1

All times are GMT -5. The time now is 06:16 PM.