powervalve spacer clearance
I have a Christini AWD with 2015 300 engine and E start in it.
I wanted to try the power valve spacer. How wide are they? It looks like it be very close to hitting the starter if it were spaced out more than a half inch or so. Do they fit the newer engines with E start? Thanks. |
Quote:
Sent from my Moto G (4) using Tapatalk |
You can always bump your ignition timing a few degrees for free. That will give you more bottom end and midrange. Listen for knock just in case but I have not had a problem with this on any of my bikes.
|
I have the spacer sold from motocrosscenter in my 2015 300 e start and it fits just fine.No problem with the starter at all.
|
Quote:
|
Yes I have adjusted the pv.I have turned the screw from 2 turns out (standard) to 2,5 turns out because I want a more aggressive throttle response (like my 06 300 had :D )
Apart from that the spacer will benefit you in low revs whatever setting you choose for the pv. |
So the spacer from checkpoint offroad DOES fit the 2015 300 engine with the e start. BARLEY!!! But it does!
Noticed absolutely no difference in power at all. |
All times are GMT -5. The time now is 12:36 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org