Triple Clamp Bolts Torque?
 

Hi all, I have a 2004 EC300 with Marzocchi forks.

Can anyone tell me the correct torque for the triple clamp bolts?

I'm confused as the Torque Table states 20Nm upper and 16Nm and lists them as M8 bolts, but mine has M7 bolts.

I think all years have M7 bolts. The torque you have found seem quite ok to me.

Sent fra min YAL-L21 via Tapatalk

For reference.

http://www.gasgasrider.org/torque_table.jpg

Jeff

Hi Jeff, yes that's the Torque Table I was talking about. But it list the bolts as M8 and mine are M7.

....it was put.together by Glenn quite a while ago. So the size of fasteners might have changed along the way. Not sure.

Jeff

I had an '05 with 45mm Marzocchi forks and used that torque guide on it. Seemed to work good for me.