Rieju & GasGas Legacy Riders Club Forum

Rieju & GasGas Legacy Riders Club Forum (http://www.gasgasrider.org/forum/index.php)
-   Enduro Intake/Carburetion - 2 stroke (http://www.gasgasrider.org/forum/forumdisplay.php?f=15)
-   -   2018 ec300 no start (http://www.gasgasrider.org/forum/showthread.php?t=24529)

Gez 06-14-2019 07:32 AM

2018 ec300 no start
 
New to me bike 21hours on it, was a massive pain to start hot or cold when I got it so I did the choke plunger mod, put a #40 pilot jet into it, set the floats, AS 1.5 out, new plug. Also did all the wiring updates for the starter etc.
Now I can't start it at all, no spark when I use the kick starter, but decent enough when estart is pressed (won't start on estart when cold I guess).
I am new to 2 strokes but what could I be missing? I just want to ride the thing

Jakobi 06-14-2019 06:57 PM

Multi meter time!

Check the resistance for the stator, coil, and ht lead.

Worth while checking the flywheel nut as well. A couple have had issues which resulted in the woodruff key sheering and timing going out.

Gez 06-14-2019 07:45 PM

Thanks, I'll crack into that today

Gez 06-15-2019 02:37 AM

0.7ohms on the coil and 9.49(on 20k) on the plug lead.

Can't work out the stator wiring, the only workshop manual I can see has different coloured wires, so I'm abit stumped there.

Gez 07-03-2019 07:45 PM

Update:
Duh, duh, duh.

CDI wasn't plugged in correctly!

adriano.ro 07-03-2019 10:28 PM

Plugged from you? Did you work on it or it was from factory in that way?

Gez 07-06-2019 05:24 AM

The bike had 20hours on it when I purchased it so no idea. I also disconnected the cdi whilst doing some checks, so it may have been my mistake!


All times are GMT -5. The time now is 05:57 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org