Is clutch basket position critical on re-assembly
Rebuilding 300 after main bearing failure. Read workshop manual after stripping, oops, and it states mark clutch basket before removal to ensure correct position on re-assembly. I didn't mark it! I cant see anything that requires alignment on assembly but have I missed something. Any advice welcome.
cheers, Simon |
Not critical.
Same as when you replace the basket, no index marks. |
All times are GMT -5. The time now is 10:52 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org