2005 EC200 jetting help
 

got a new to me 2005 gasser 200,took out the carb to see what jetting it had,couldnt make out anything on the needle,I assume its stock,it had a 180 main and 40 for jets ?does that sound right,havent started it yet,just sorting some things out,needs a pipe and the kicker ratchet stuff replaced like my 300 needs to have fixed also:mad: also looked like the float was way too low when you turned the carb upside down wasnt even close to parallel like im pretty sure its supposed to be,also had a br7e plug,I put in a br8eg which I think is stock,havent been on a 200 in a while,put my 06 yellow plastic on it to spruce it up a little,has the dual map ignition and the wires are connected(not sure what setting that is)

I have an 04. At 0 - 1000 ft, temp 5 - 10 deg C

I'm running 42p, 178m, N1EE needle on #2, slide #6.

ok thanks,Ill see how it runs before and after messing around some

What was Billy Burns running? The 200 is the one size GG I never jetted, but I would assume it would want to be slightly richer across the board than the 250.

If I remember correctly he said he was running 178M, 42P, LTR needle #2, and that was during July.

bike ran great with the stuff thats in it,no loading up at all and it was cold out! tells me it must be rich in the warm weather

heres a few pics of the 2hunny with my old yellow plastic on it

http://img.photobucket.com/albums/v6...icture5261.jpg

http://img.photobucket.com/albums/v6...icture5260.jpg

looks fantastic! what color was the original plastic? I thought they all were yellow?

was yellow,no graphics anywhere and not so nice still worth a grand:)

a needle with no Id on it might be an ltr needle as I believe les ground off the id because i think he changed it around a bit. Not 100% on that tho.