|
I am interested in the front/rear axles.
Do you (or anyone) know if they will fit my 2014 300? |
Quote:
J |
Quote:
|
UPDATED 8 27 16
Engine minus Stator and Flywheel (top end, bottom end, reeds) Able to provide video of the engine running just prior to part-out. $800 SOLD Pipe OEM. One very small dent-can send pics. The pipe was dented prior to my adding a P3 when I got the bike. $100 SOLD Sachs Shock. Sprung for 200lb rider weight. Valved for rocks/very soft. 0.5hrs since servicing. $100 Triple Clamps $75 SOLD FMF Turbine Core 09 200. Same part # stamped on the Silencer as my 300 $80 Wheels 09 200. $300. One dent to rear rim. OEM Plastics 09 200. In "ok" condition. Plastics are really good, OEM graphics pealing up in a couple spots. $70 SOLD Scorpion Rad Guards $75 SOLD- OEM Radiators. In good condition. Straight. Inner-most column slightly compressed. No leaks. Rads were compressed when it was a demo. $100 Front Brake complete with lever $150 SOLD Aluminum Skid Plate (gasgas) $40 Rear Brake complete with lever $150 Clutch complete, MC, Slave, Lever and Line $100 SOLD OEM Tank with Cap and Petcock. Some discoloration $75 Carb OEM. Jets, Needle, Cable not included $150 OEM Throttle Cable $15 Motion Pro +3" Throttle Cable $15 Subframe (metal portion only, no plastic/airbox etc) 09 200 $150 SOLD-Frame with Title $200. Had the kickstand/roller bracket re-welded when it cracked off in 2013. Swingarm- has defect where a bolt that was too long (installed by yours truly) wore into the material $50 Front/Rear Axles $40 SOLD CDI $40 Airbox 09 200 $ 20 Seat, no tears/normal wear $50 SOLD Full Linkage-new bearings. $100 GPR Sub-Mount kit (including collar and post). Stabilizer not included $50 OEM Chain Guide $10 SOLD-MAP Switch $10 SOLD OEM Bar Mounts $10 Bucket of Bolts. 75% of the bolts, nuts, fasteners, etc. Basically all the bits left-over after the part-out $40 OEM Handguards/Plastic Deflectors (removed at 5hrs) $5 SOLD OEM Wiring Harness $50 This will take a few extra days as I will have to remove the Sicass portions. SOLD Sachs Forks-Red with hard-mounted Motion Pro Bleeders. $ make an offer. Selling to be used for parts, not to be ridden. In fact I may disassemble prior to shipping. Sicass Dual-Sport Lighting Kit. I might consider selling this (also considering putting it on my 200). __________________ __________________ 2010 300 ec. Loving it 2009 200 ec. Loving it 2007 Beta Rev 3 270 2007 KTM 200 XC Wife's Public Lands belong to the Public Last edited by husley; Yesterday at 04:18 PM. |
UPDATED 09 03 16
Triple Clamps $75 Wheels 09 200. $300. One dent to rear rim. OEM Plastics 09 200. In "ok" condition. Plastics are really good, OEM graphics pealing up in a couple spots. $70 Clutch complete, MC, Slave, Lever and Line $100 Carb OEM. Jets, Needle, Cable not included $150 OEM Throttle Cable $15 Swingarm- has defect where a bolt that was too long (installed by yours truly) wore into the material $50 Front/Rear Axles $40 Airbox 09 200 $ 20 Seat, no tears/normal wear $50 GPR Sub-Mount kit (including collar and post). Stabilizer not included $50 OEM Chain Guide $10 OEM Handguards/Plastic Deflectors (removed at 5hrs) $5 Sicass Dual-Sport Lighting Kit. $200 http://sicassracing.com/store/produc...w_turn_signals |
Does the dual sport kit come with a headlight?
|
Quote:
Sorry J |
I'll take the axles off of your hands, if CombatYoga doesn't want them.
Changing out tires, my front axle is fused to the bearing, I can probably save it, would be nice to have a spare incase I destroy it. Thanks! |
Quote:
The front will be different due to the lug changes between the Sachs and 48mm Marzocchis. I didn't investigate any further, as when I put my 48mm Sachs with TTX inserts on the 2013 I first tried the 13 axle, and when it didn't fit up used the old one. |
Might have missed it, did the engine sell?
|
| All times are GMT -5. The time now is 08:56 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org